Durock Cement Board

USG Durock Brand cement board with EdgeGuard offers architects, builders and tile contractors a strong, water-durable tile base for tub and shower areas. Also an ideal underlayment for tile on floors and countertops in new construction and remodeling. Board is readily applied over wood or steel framing spaced 16 in.

Is cement board and durock the same?

Durock and Hardiebacker are two different brands of cement backer boards used in rooms that are susceptible to moisture buildup.

Is Durock cement board waterproof?

Should USG Durock® Brand Cement Board Panels be waterproofed in wet area use? Water does not affect USG Durock® Brand Cement Board, however, TCNA guidelines recommend the use of a waterproof membrane in wet areas.

Which is better durock or Hardibacker?

Durock is too abrasive and can damage vinyl, porcelain, and enamel. HardieBacker does not contain any course materials, so it is the preferable choice. It has a warranty that extends over the use of vinyl tile applications.

Can you use durock as a subfloor?

B. Laminate DUROCK cement board to subfloor using Type 1 organic adhesive, latex-fortified mortar or dry-set mortar mixed with acrylic latex additive that is suitable for bonding cement backer board to plywood subfloor, with 1/4″ square-notched trowel for mortar, 5/32″ V-notched trowel for adhesive.

Can you tile directly onto cement board?

Cement board forms a durable, stable base for tile, and it has no organic materials (unlike drywall, greenboard, or plywood) so it is not prone to mold, rot, shrinkage, or decomposition due to moisture. Ceramic tile laid over cement board is one of the most durable floor or wall surfaces you can install.

Can durock be used outside?

Can USG Durock® Brand Cement Boards be used on the interior and exterior of buildings? Yes. They can also be used in below-grade applications such as basements.

Can durock get mold?

Durock is a concrete tile backer board that is water and fire resistant. It made up of ground up concrete that is wrapped with fiberglass mesh around it to help hold it together. You can submerge Durock under water and it will not disintegrate or mold.

Can you durock 1/4 walls?

1/4″ hardibacker alone is an unsuitable substrate for shower wall tile. If it were attached to properly waterproofed drywall, plywood, or plaster it would be fine. Think about it, one wayward elbow, knee, or hip bump and you may get flexion which would cause the grout (or tile) to crack.

How do you cut durock?

To cut DUROCK Next Gen Cement Board, measure the desired size on the board and mark on the front and back with a pencil. Score with a utility knife, cut through the glass-fiber mesh then snap the board to size. Smooth edges with wood rasp. Wear a dust mask and eye protection.

Does cement board break easily?

Stronger than plywood and less susceptible to damage from rot, cement backer board makes for a reliable, more durable building material than wood. Its strength and cement construction, however, present more challenges than wood-based materials do when it comes time to do the cutting.

Do you need thinset under durock?

However, many manufacturers including, both Durock and Hardiebacker not only recommend that you use thinset under their backerboard, but they specify it and will void the warranty on their product if it’s not used.