How Does the Idle Air Control Valve Work?
An Idle Air Control Valve Literally Bypasses Air Around a Closed Throttle Plate So the Engine Can Get Air at Idle. Because It Bypasses Air, It's Also Called an...
.
Just so, what happens when the idle air control valve goes bad?
One of the most common symptoms associated with a problematic idle air control valve is irregular idle speed. If the valve fails or has any issues it can cause the idle speed to be thrown off. This may result in an unusually high or low idle speed, or in some cases a surging idle speed that repeatedly climbs and falls.
Also, how do I reset my idle air control valve? Reset the IAC valve pintle position by performing the following:
- Depress the accelerator pedal slightly.
- Start the engine and run for 5 seconds.
- Turn the ignition switch to the OFF position for 10 seconds.
- Restart the engine and check for proper idle operation.
Just so, how do you know if your idle air control valve is bad?
Bad Idle Air Control Valve Symptoms
- 1) Intermittent Idle Speed. Since the idle air control valve is supposed to manage the idle speed of the engine, a bad valve will certainly throw that out of whack.
- 2) Check Engine Warning Light.
- 3) Rough Idling.
- 4) Engine Stalling.
- 5) Load Causes Stalling.
How do I test a idle air control valve with a multimeter?
To test the coil driver circuits in the IAC valve:
- Using an ohmmeter, measure the resistance between pins 3 and 2 on the IAC valve.
- Resistance should be 10-14 ohms.
- Using an ohmmeter, measure the resistance between pins 1 and 2 on the IAC valve.
- Resistance should be 10-14 ohms.
