Prefabricated Spa Pad

If you’re having a base installed especially for your Hot Tub we would recommend a patio, decking area or poured concrete base. Whatever you choose make sure whoever installs it for you ensures the base is level and large enough for your Hot Tub and steps.

Does a hot tub need a concrete pad?

A hot tub requires a stable surface — whether it’s a concrete slab, reinforced deck, or firmly compacted soil with crushed gravel. There’s also the option to have the hot tub installed in the ground but that still requires a concrete vault.

Is it OK to put a hot tub on pavers?

A hot tub can be placed on pavers, but ensure that they can bear the weight of the hot tub, including water and persons. Ensure that the floor is level and solid. Most pavers are laid at an angle to improve rainwater removal. Such a slope is not suited for a hot tub.

Can I put hot tub on gravel?

The construction gravel should be topped with another layer of smaller sized pea gravel until it is perfectly even with the edges of the excavated area. So yes, a hot tub can sit on gravel! To find out more about hot tub installation requirements, download a hot tub buyer’s guide.

What size are hot tub pads?

The spa pad should be at least the size of the spa. If you are going to pour cement pad put a slight slope in it so that water won’t pool under the spa. A 3/4″ slope in a 10 foot wide cement pad is adequate.

Does hot tub wiring need to be buried?

Any outlet supplying power to the tub must be GFCI protected. Installation of an approved manual disconnect device must be within line of sight of the spa. The disconnect must be adjacent to the tub and no closer than 5 feet away. Buried wires must be at least 18 inches deep.

What kind of power supply do I need for a hot tub?

Most hot tubs require a 240v electrical hookup—which for most people means you have to call an electrician and have new wiring done. However, a Plug n’ play spa runs on standard 110V power, which can be plugged into most standard household power sources without the need for additional wiring.

How far should a hot tub be from the house?

Best Location for an Outdoor Hot Tub

Proximity to the house. To reduce the risk of electrocution, place your tub at least 16 feet away from overhead power lines. To protect your home and outbuildings from potential flooding, keep it at least 5 feet from any structure.

How do I level my backyard for a hot tub?

Place a layer of gravel on the leveled spot. The thickness of the layer will depend on the size and weight of your hot tub, but a layer four to six inches thick should be adequate for most hot tubs. Extend the gravel out around the tub in all directions, to avoid having a muddy area around your hot tub.

Does a hot tub have to be perfectly level?

Once a hot tub has been filled with water and bathers, it can weigh over 8,000 pounds. Any surface dips can create stress on the hot tub shell, which can lead to cracking. When leveling a hot tub, it is important to ensure that the surface is completely flat but also that water drainage can easily occur.

Is pea gravel good for hot tub base?

Short answer is: Yes. Gravel is an excellent base for hot tubs because it allows for drainage of water while being sturdy enough to handle the high weight of a hot tub.

Can you put a hot tub directly on the ground?

Outdoor hot tub placement, such as decks, concrete or brick patios, is common. However, the hot tub can be placed on any solid, uniform, level surface. Do not place your hot tub on grass or bare ground.

How do you make a gravel pad?

Gravel Pad in Box
Prepare Construction Site. Remove all vegetation and rocks from the building area. Digging Out. Remove any grass from within the pad perimeter. Build the Frame for Gravel Pad. Save. Drainage Tile. Landscaping fabric and drainage tile. Lay Landscaping Fabric. Pour and Compact the Gravel. Check for Level.